Detail
Product details：
1, column using h-beam structure, high rigidity of wide span slippery course design, precision guide rail grinding, strong rigidity, good stability, precision grinding grind cutting columns not elastic deformation, to ensure that the workpiece machining accuracy and surface finish.
2, the machine is in the domestic leading, alternative products in Taiwan.
| Technical parameters | GD-618S | |
| Table longitudinal direction | 500 mm | |
| Table lateral movement | 190 mm | |
| Work surface maximum distance to the main shaft center | 335 mm | |
| The workbench slide | Flat steel ball V rail | |
| Workbench bearable | 200 kg | |
| The workbench mesa size (length * width) | 460×180 mm | |
| The workbench T slot | 14×1 | |
| The workbench speed | 3-23 m/min | |
| Before and after the handwheel feed quantity | 0.02mm/2.5mm/circle | |
| Up and down the handwheel feed quantity | 0.01mm/1.25mm/circle | |
| Grinding wheel size (diameter x width x inside diameter) | 180×13×31.75 mm | |
| Spindle speed | 50Hz | 2850 rpm |
| Frequency modulation motor | 0-6000 rpm | |
| The total power of the motor | 1.14 kW | |
| Grinding head motor power | 1.1 kW | |
| Cooling pump | 0.4 kW | |
| Machine tool appearance size (length x width x height) | 1550×1150×1590 mm | |
| Packing size (length x width x height) | 1000×1150×1760 mm | |
| Gross weight, net weight | 0.75、0.65 T | |
Special accessories
| Magnetic chuck/permanent magnetic chuck | Dry wet amphibious vacuum cleaner |
| Up and down before and after the trimming device | Tilting type magnetic chuck/permanent magnetic chuck |
| Parallel to the whole wheel manually | Type balance |
| Magnet filter | Optical ruler |
| Automatically take off a magnetic | Dynamic magnetic device off |
| Point of forming device | Arc forming device |
| The spare wheel set | Dry dust collection device |
